HOME Contributions a des ouvrages collectifs Articles Conferences Theses et memoires supervisees completees Theses en cours Brevets

Publications, livres, conferences, supervision

Pierre Proulx

Contributions a des ouvrages collectifs

  1. Pierre Proulx, Plasma-Particle Heat Transfer, ISBN 978-3-319-32003-8 , dans "Handbook of Thermal Science and Engineering", Springer International Publishing, Francis A. Kulacki, editeur, (2017)

  2. NEPTIS-18 'Nanoparticle Synthesis in Gas Phase and its Application: Fundamentals and applications of nanoparticles synthetized by plasma, flame and laser' , Sponsorship by Nisshin Engineering, Japan (2010).

  3. Proulx, P. , 'Thermal Plasma Synthesis', Von Karman Institute Lecture Series : , Modeling and Simulation of Nanoparticles in Fluid Flow, Edited by von Karman Institute for Fluid Dynamics, Belgium , (2009)

  4. Proulx, P., Mbark ElMorsli, 'Mathematical modelling of advanced thermal plasma reactors and application to nanoparticle production ', AIP Proceedings 982, 5th International Conference on Complex systems ISBN 978-0-7354-0501-1, pp. 569-576, (2008)

  5. P.Proulx, 'Thermal Plasma Synthesis of Nanoparticles', Von Karman Institute Lecture Series: Production, Transport and Application of nanoparticles, Edited by von Karman Institute for Fluid Dynamics, Belgium , ISBN-13 978-2-930398-74-5, (2007)

  6. P.Proulx, 'Plasma Reactor Design for Nannoparticle Production', Von Karman Institute Lecture Series: Production, Transport and Application of nanoparticles, Edited by von Karman Institute for Fluid Dynamics, Belgium , ISBN-13 978-2-930398-74-5, (2007)

  7. Aubes,M. Proulx,P. Chapelle,J. Coudert,J.F.; Gleizes,A.; Haug,R.; Jüttner,B; Lefort,A.; Vacquie,S.; Verite,J.C.," Interaction plasma-particules condensees", chapitre 10, pp.225-233 (2000)

  8. Rahmane,M. Soucy,G. Proulx,P." Heat and Mass Transfer under Thermal Plasma Conditions", Recent Research Development in Heat, Mass and Momentum, edition 2, pp. 103-120 (1999)

  9. Bilodeau,J.-F. Proulx,P. Chornet,E. "A Mathematical Model of Fluidized Bed Biomass Gasification", Mixed Flow Hydrodynamics, Nicolas P. Cheremisinoff, Editor, Houston, Texas pp. 689-711 (1996)

Articles soumis, acceptes et publies dans des revues internationales avec jury

  1. Gabriel St-Pierre Lemieux ,Ehsan Askari Mahvelati, Denis Groleau Pierre Proulx , "Modeling of Non-Newtonian Flow in an Inverted Cone Foam Breaker" , International Journal of Chemical Reactor Engineering, (2019).

  2. Ehsan Askari , Gabriel St-Pierre Lemieux , Pierre Proulx , "Application of Extended Quadrature Method of Moments for Simulation of Bubbly Flow and Mass Transfer in Gas-Liquid Stirred Tanks " , The Canadian Journal of Chemical Engineering , february (2019).

  3. Roshanak Rabiee, Rajabloo B., Martin Desilets Pierre Proulx, "Heat transfer analysis of boiling and condensation inside a horizontal heat pipe" , International Journal of Heat and Mass Transfer ,Volume 139 pages 526-536 (2019).

  4. Ghofrane Sekrani, Sebastien Poncet , Pierre Proulx, " Conjugated heat transfer and entropy generation of Al2O3-water nanofluid flows over a heated wall-mounted obstacle " , Journal of Thermal Analysis and Calorimetry , 135(2), pp. 963-979 (2019).

  5. Ehsan Askari , Gabriel St-Pierre Lemieux , Pierre Proulx , "Simulation of bubbly flow and mass transfer in a turbulent gas-liquid stirred tank with CFD-PBM solver in OpenFOAM: EQMOM application" , International Conference of Numerical Analysis and Applied Mathematics, ICNAAM 2017,Volume 1978, Article number 030024 (2018).

  6. Roshanak Rabiee, Michel Julien, Mohsen Ariana, Martin Desilets Pierre Proulx, "Determination of Condensation Heat Transfer inside a Horizontal Smooth Tube" , International Journal of Heat and Mass Transfer ,Volume 124, pages 816-828 (2018).

  7. Giuliana Litrico, Elaheh Oliai, Pierre Proulx, " Mass Transfer Study Inside a Li Production Electrolysis Cell Based on a Rigorous CFD Analysis" , Journal of Fluid Flow, Heat and Mass Transfer , Volume 5 - Pages 18-31, (2018).

  8. Camila Braga Vieira, Giuliana Litrico, Ehsan Askari, Gabriel St-Pierre-Lemieux, Pierre Proulx, " Hydrodynamics of bubble columns: turbulence and population balance model" , ChemEngineering ,Vol. 2, No. 1(2018).

  9. Ehsan Askari , Pierre Proulx , Alberto Passalacqua, " Modelling of Bubbly Flow Using CFD-PBM Solver in OpenFOAM: Study of Local Population Balance Models and Extended Quadrature Method of Moments Applications" , ChemEngineering ,Vol. 2, No. 1(2018).

  10. Ghofrane Sekrani, Sebastien Poncet , Pierre Proulx, " Modeling of convective turbulent heat transfer of water-based Al2O3 nanofluids in a uniformly heated pipe " , Chemical Engineering Science ,Vol. 176, pp.205-219 (2018).

  11. Litrico, G., Vieira, C.B.,Askari E. Proulx, P. "Investigation of the Optimum Operative Conditions for a Parallel Plate Electrochemical Reactor " , Vol. 75 (37), pp. 37-57 ECS Transactions , (2017).

  12. Litrico, G., Vieira, C.B.,Askari E. Proulx, P. "Strongly coupled model for the prediction of the performances of an electrochemical reactor " , Chemical Engineering Science, Vol. 170, No. 12, pp. 767-776 (2017).

  13. Caron-Laramee, A. Proulx, P. , Brouillette M. " Analytical model of spherical projectile penetration into ballistic gels" , Vol. 2, pp. 1964-1972, Proceedings - 29th International Symposium on Ballistics, BALLISTICS , (2016).

  14. Litrico, G., Proulx, P., Gouriet, J.-B., Rambaud, P., "Controlled Oxidation of Aluminum Nano Particles" , Volume 26, issue 1, pp. 1-7 , Advanced Powder Technology, (2015).

  15. Ariana M., Desilets, M., Proulx, P., "On the analysis of ionic mass transfer in the electrolytic bath of an aluminum reduction cell" ,Volume 92, issue 11, pp. 1951-1964 , The Canadian Journal of Chemical Engineering (2014)

  16. Selma, B., Desilets, M., Proulx, P., "Optimization of an industrial heat exchanger using an open-source CFD code", Applied Thermal Engineering, 69 (1-2), pp. 241-250, (2014).

  17. Lopes, S., Proulx, P., Gouriet, J.-B., Rambaud, P., "Model for metallic nanoparticles production: A tool for design study",TMS Light Metals, Pages 111-118, (2013)

  18. Ariana, M., Desilets, M., Proulx, P., "Numerical analysis of ionic mass transfer in the electrolytic bath of an aluminium reduction cell", TMS Light Metals, Pages 695-699, (2013)

  19. Bannari, R., Bannari, A., Vermette, P., Proulx, P., " A model for cellulase production from trichoderma reesei in an airlift reactor" , Biotechnology and Bioengineering, Volume 109, Issue 8, pp. 2025-2038,(2012)

  20. Sklinnyy, A.,Dubois, J., Sabra, G., Sharp, Gagnon, S., Proulx, P., Vermette, P., " Bioreactor controlled by PI algorithm and operated with a perfusion chamber to support endothelial cell survival and proliferation", Biotechnology and Bioengineering, Volume 109, Issue 5, Pages 1305-1313, (2012)

  21. Sklinnyy, A., Proulx, P., Sharp, J. Lepage, M., Vermette, P., "Diffusion of rhodamine B and bovine serum in fibrin gels seeded with primary endothelial cells", Colloids and Surfaces B: Biointerfaces 93, pp. 202-207, (2012)

  22. Irani, M., Alizadehdakhel, A., Pour, A.N., Proulx, P., Tavassoli, A., “An investigation on the performance of a FTS fixed-bed reactor using CFD methods”, International Communications in Heat and Mass Transfer, Volume 38, Issue 8, Pages 1119-1124 (2011)

  23. Centis, V., Proulx, P., Vermette, P. PEGylated liposomes encapsulating human hemoglobin enhance oxygen transfer and cell proliferation while decreasing cell hypoxia in fibrin Biochemical Engineering Journal, Volume 55, Issue 3, 15 , Pages 162-168 (2011)

  24. Bannari R., Bannari A., Selma B, P. Proulx, “Mass transfer and shear in an airlift bioreactor: using a mathematical model to improve reactor design and performance “, Chemical Engineering Science,66 (10), pp. 2057-2067 ; (2011)

  25. Mbark El Morsli, P. Proulx,, Gravelle D., “ Chemical non-equilibrium modelling of an argon-oxygen supersonic ICP”, Plasma Sources Science and Technology , Volume 20, no 1, art. no. 015016 (2011)

  26. Selma, B., Bannari, R., Proulx, P. "A full integration of a dispersion and interface closures in the standard k - ε model of turbulence", Chemical Engineering Science, 65 (20), pp.5417-5428 (2010)

  27. Selma, B., Bannari, R., Proulx, P. "Simulation of bubbly flows: Comparison between direct quadrature method of moments (DQMOM) and method of classes (CM)", Chemical Engineering Science, 65 (6), pp.1925-1941 (2010)

  28. Murphy A.B., Boulos M.I., Colombo V., Fauchais P., Ghedini E., Gleizes A., Mostaghimi J. Proulx P., Schram D.C., Advanced Thermal Modelling, High Temperature Material Processes, Vol. 12., Issue 3-4, pp.255-336, (2008)

  29. Bannari,R., B. Selma and P. Proulx,"Three-Dimensional Mathematical Modelling of dispersed two-phase flow Using Class method of population balance in bubble columns", Computers and Chemical Engineering, Vol. 32, 12, pp.3224-3237, (2008)

  30. Bannari,C. Cirtiu, P. Proulx, H.Menard, 'Mathematical modeling of the kinetics of phenol electrocatalytic hydrogenation over supported Pd-alumina catalyst', Applied Catalysis A: General, Vol. 345, 1, pp.28-42, (2008)

  31. N.Y. Mendoza-Gonzalez, Mbark El Morsli, P. Proulx, "Production of Nanoparticles in Thermal Plasmas: A Model Including Evaporation, Nucleation, Coalescence and Fractal Aggregation", Journal of Thermal Spray Technology, Vol. 17, No. 4, pp. 533-550, 2008

  32. F. Kerdouss, A. Bannari, P. Proulx, Y. Labrecque Y and M. Szerga "Two-Phase Mass Transfer Coefficient Prediction in stirred vessel with a CFD Model ", Computers and Chemical Engineering, Vol. 32, 8, pp. 1943-1955, (2008)

  33. Mbark El Morsli, P. Proulx, “ Two temperature chemically non-equilibrium modeling of an air supersonic ICP”, Journal of Physics D: Applied Physics, Vol. 40, No 16, (2007)

  34. B Goortani, N. Y. Mendoza Gonzalez, Siwen Xue, P. Proulx,“Controlling nanostructure in thermal plasma processing: moving from highly aggregated, porous structure to spherical silica nanoparticles”, Powder technology, Vol. 175, No. 1, pp. 22-32, (2007)

  35. N.Y. Mendoza-Gonzalez, B.M. Goortani and P. Proulx, "Numerical simulation of silica nanoparticles production in an RF plasma reactor: effect of quench", Materials Science and Engineering: C , Vol. 27, Nos 5-8, pp. 1265-1269 (2007)

  36. Mbark El Morsli, P. Proulx, “A chemical non-equilibrium model of an air supersonic ICP”, Journal of Physics D: Applied Physics, 40, No 2, 380-394(2007)

  37. B. Goortani, N. Y. Mendoza Gonzalez, P. Proulx, “Synthesis of SiO2 Nanoparticles in RF Plasma Reactors: Effect of Feed Rate and Quench Gas Injection”, International Journal of Chemical Reactor Engineering,Vol. 4, paper A33 (2006)

  38. N. Y. Mendoza Gonzalez, P. Proulx, B. Goortani, “Numerical study of the synthesis of nanoparticles in an inductively coupled plasma reactor”, Czechoslovak Journal of Physics, Vol. 56B, pp. B1263-B1270 (2006)

  39. F. Kerdouss, A. Bannari, P. Proulx, “CFD modeling of gas dispersion and bubble size in a double turbine stirred tank”, Chemical Engineering Science, Vol. 61, no 10, pp.3313-3322, (2006)

  40. A. Bannari, C. Cirtiu, F. Kerdouss, P. Proulx, H. Menard, “Turbulence intensity in an electrochemical cell: Effect on reactor performance”, Chemical Engineering and Processing, Vol. 45, no 6, , pp. 471-480, (2006)

  41. Kerdouss F, Kiss L, Proulx P., Bilodeau J.-F., Dupuis C., “Mixing characteristics of an axial-flow rotor: Experimental and numerical study” , International Journal of Chemical Reactor Engineering, Vol. 3, paper A35 (2005)

  42. Chagnes, A., Laplante, F., Kerdouss, F., Proulx, P., Menard, H., “Experimental and computational investigation of the electrocatalytic hydrogenation of phenol in an electrochemical cell”, Canadian Journal of Chemistry, v 82, n 5, p 641-648 (2004)

  43. Ye, R., Ishigaki, T., Jurewicz, J., Proulx, P., Boulos, M.I., “In-flight spheroidization of alumina powders in Ar-H2 and Ar-N2 induction plasmas,” Plasma Chemistry and Plasma Processing, v 24, n 4, December, p 555-571, (2004)

  44. Marcos,B., Proulx,P., Vermette P., Biotechnological Engineering: A New Discipline Designed to Meet, New Demands , Canadian Chemical News, pp.16-19, april (2004)

  45. Vermette P., Proulx P., Marcos B., "Toward an integrated biotechnological engineering education program: a Canadian perspective", Nature Biotechnology, 21 (12), pp. 1525-1527 (2003)

  46. Dube, P., Kerdouss, F., Laplante, F., Proulx, P., Brossard, L., and Menard, H. “Electrocatalytic hydrogenation of cyclohexanone: Simple dynamic cell design” , Journal of Applied Electrochemistry 33 [6], pp. 541-547 (2003).

  47. Burm, KTAL, Jodoin, B., Proulx, P., and Boulos, M. I. “Modeling of Supersonic ICP argon-hydrogen expansion”, Plasma Sources, Science & Technology, 12 , pp. 362-371 (2003).

  48. Blais A., Proulx P. , Boulos M.I., "Three-dimensional numerical modelling of a magnetically deflected dc transferred arc in argon", Vol. 36, No. 5, pp. 488-496, Journal of Physics D: Applied Physics, (2003)

  49. Xue S, Proulx P., Boulos M.I., "Effect of coil angle in an inductively couple plasma torch: A novel two-dimensional model", Plasma Chemistry and Plasma Processing, Vol. 23, no 2, pp. 245-263 (2003)

  50. Bartosiewicz,Y., Mercadier,Y., and Proulx,P. "Numerical Investigations on the Dynamics and Heat Transfer in a Turbulent Underexpanded Jet", AIAA Journal,Vol 40, No. 11, (2002)

  51. Bartosiewicz,Y., Mercadier,Y., and Proulx,P, "A self-consistent two-temperature model for the computation of supersonic argon plasma jets", Journal of Physics D: Applied Physics, 35, pp.2139-2148, (2002)

  52. Delannoy, Y., Alemany, C., Li, K.-I., Proulx, P., and Trassy, C., "Plasma-Refining Process to Provide Solar-Grade Silicon", Solar Energy Materials & Solar Cells, 72 (1-4), pp.69-75 (2002)

  53. Xue, S., Proulx, P., and Boulos, M. I., "Modelling the effect of ferrite on an inductively coupled plasma torch. Part 2: Finite ferrite permeability", Journal of Physics D: Applied Physics, 35, pp.1131-1140 (2002)

  54. Xue, S., Proulx, P., and Boulos, M. I., "Modelling the effect of ferrite on an inductively coupled plasma torch. Part 1: Infinite ferrite permeability", Journal of Physics D: Applied Physics, 35, pp.1123-1130 (2002)

  55. Hassaine, S., Trassy, C., and Proulx, P., "Continuous Emission Monitoring of Metals in Flue Gases by ICP-OES: Role of Calibration and Sample Gases", High Temperature Material Processing, 5, pp.313-332 (2001)

  56. P. Proulx, C. Trassy, Control of Inductively Coupled Plasma Processes by Modelling of the Optical Spectroscopic Emission. Progress in Plasma Processing of Materials., pp.37-44, (2001)

  57. Jodoin, B. and Proulx, P., "Design Study of the Supersonic D.C. Plasma Spray Torch", High Temperature Material Processing, 5 (1), pp.107-130 (2001)

  58. Xue, S., Proulx, P., and Boulos, M. I., "Extended - Field Electromagnetic Model for the Inductively Coupled Plasma", Journal of Physics D: Applied Physics, (34), pp.1897-1906 (2001)

  59. Addona, T., Proulx, P., and Munz, R. J., "Mathematical Modelling of Silica Anode Decomposition", Plasma Chemistry and Plasma Processing, 20 (4), pp.521-553 (2000)

  60. Jodoin, B. and Proulx, P., "Mathematical Modelling of the Supersonic d.c. Plasma Spray Torch: Influence of Hydrogen and Current Intensity", High Temperature Material Processing, 4, pp.21-42 (2000)

  61. Ye, R., Proulx, P., and Boulos, M. I., "Particle Turbulent Dispersion and Loading Effects in an Inductively Coupled Radio Frequency Plasma", Journal of Physics D: Applied Physics, 33, pp.2154-2162 (2000)

  62. Beauchire, J.-M., Gonzales, J.-J., and Proulx, P., "Modelling of the Plasma-Particle Interaction in a Plasma Jet", Journal of Physics D: Applied Physics, 32 (6), pp.675-681 (1999)

  63. Ye, R., Proulx, P., and Boulos, M. I., "Turbulence Phenomena in the Radio Frequency InductionPlasma Torch", International Journal of Heat and Mass Transfer, 42 (9), pp.1585-1595 (1999)

  64. Desilets, M., Davies, B., Soucy, G. and Proulx, P. "Mixing Study in an Inductive Plasma Reactor: Comparison Between Model Calculation and Experimental Results", Canadian Journal of Chemical Engineering, 76, pp.707-716 (1998)

  65. Jodoin, B. and Proulx, P. "Numerical Study of Supersonic Direct Current Plasma Nozzle Flow", AIAA Journal,36 (4), pp. 578-584 (1998)

  66. Desilets, M., Bilodeau, J.-F. and Proulx, P. "Modelling of the Reactive Synthesis of Ultrafine Powders in a Thermal Plasma Reactor", Journal of Physics D: Applied Physics, 30 pp. 1951-1960 (1997)

  67. Desilets, M., Proulx, P. and Soucy, G. "Modeling of Multicomponent Diffusion in High Temperature Flows", International Journal of Heat and Mass Transfer, 40 (18), pp. 4273-4278 (1997)

  68. Poulin, A., Dostie, M., Proulx, P. and Kendall, J. "Convective Heat and Mass Transfer and Evolution of the Moisture Distribution in Combined Convection and Radio Frequency Drying", Drying Technology 15 (6-8), pp. 1893-1907 (1997)

  69. Bilodeau, J.-F. and Proulx, P. "A Mathematical Model for Ultrafine Iron Powder Growth in a Thermal Plasma", Aerosol Science and Technology 24 (3), pp. 175-189 (1996)

  70. Gaillat, A., Barnes, R.M., Proulx, P. and Boulos, M.I. "Computer Simulation of Enclosed Inductively Coupled Plasma Discharges-Part I -Monotomic Gases", Journal of Analytical Atomic Spectroscopy, 10 pp. 935-940 (1995)

  71. Gaillat, A., Barnes, R.M., Proulx, P. and Boulos, M.I. "Computer Modelling of Enclosed Inductively Coupled Plasma Discharges", Spectrochimica Acta B, 50B (10), pp. 1187-1205 (1995)

  72. Gaillat, A., Barnes, R.M., Proulx, P. and Boulos, M.I. "Computer Simulation of Enclosed Inductively Coupled Plasma Discharges-Part II -Molecular Gases", Journal of Analytical Atomic Spectroscopy, 10 pp. 941-946 (1995)

  73. Cao M., Mostaghimi J.T., Proulx P. and M. I. Boulos, "Mathematical Modelling of High-Power Transferred Arcs", Journal of Applied Physics, 76, 12, 7757-7767, (1994)

  74. Essoltani A., Proulx P., Boulos M.I., Gleizes A."Effect of the Presence of Iron Vapors on the Volumetric Emission of Ar/Fe and Ar/Fe/H2 Plasmas", Plasma Chemistry and Plasma Processing, Vol 14., 3, 301-316, (1994)

  75. Essoltani A., Proulx P., Boulos M.I., Gleizes A., "Volumetric Emission of Argon Plasmas in the Presence of Vapors of Fe, Si, and Al", Plasma Chemistry and Plasma Processing, Vol. 14, 3, 437-450. (1994)

  76. Gonzalez J.-J., Gleizes A., Proulx P., Boulos M.I., "Influence of Evaporation and Radiation from the Anode in Transferred Arc", Journal of Applied Physics, 74, 3065-3070, (1993)

  77. Essoltani A., Proulx P., Boulos M.I., Gleizes A., "A combined convective, conductive and radiative study of plasma-particle transfer",Vol 2, No. 1, High Temperature Chemical Processes, p. 37, (1993)

  78. Bilodeau J.-F., Therien N., Proulx P., Chornet E.,"A Mathematical Model of Fluidized Bed Biomass Gasification", Canadian Journal of Chemical Engineering, Volume 71, 549-557 (1993)

  79. Bilodeau J.-F., Proulx P., "Analysis of ultrafine particle growth in a plasma reactor", High Temperature Chemical Processes,Vol 1, No. 3, p. 141 (1992)

  80. Proulx P. , Bilodeau J.-F. "A Model for Ultrafine Powders Production in a Thermal Plasma Reactor", Plasma Chemistry and Plasma Processing, Vol 11, No. 3, p. 371, (1991)

  81. Proulx P. , Mostaghimi J., Boulos M.I., "Radiative Effects in ICP Modelling", International Journal of Heat and Mass Transfer, Vol. 34, No. 10, pp.2571-2579 (1991)

  82. Proulx P. , Mostaghimi J. Boulos M.I., "Modelling the Vaporization of Small Metallic Particles in a D.C. Plasma Jet", HTD-Vol. 161, Heat Transfer in Thermal Plasma Processing, ASME pp. 155-160, (1991)

  83. Essoltani A., Proulx P. , Boulos M.I., Gleizes A., "The Importance of Radiation in the Heat Transfer to a Single Particle in a Thermal Plasma", HTD-Vol. 161, Heat Transfer in Thermal Plasma Processing, ASME pp. 145-150, (1991)

  84. Vardelle, A. Vardelle, P. Fauchais, C. Trassy et P. Proulx , "Experimental and Numerical Investigation of Powder Vaporization under Thermal Plasma Conditions", Colloque de Physique, Vol C5, 171-180, (1990)

  85. Proulx P. , Mostaghimi J.T., Boulos M.I., "Loading and Radiation Effects in Plasma Jet Modelling", Colloque de Physique, Vol. C5, 263-272, (1990)

  86. Essoltani A., Proulx P. , Boulos M.I., Gleizes A., "Emission and Self-Absorption of an Argon-Iron Plasma at Atmospheric Pressure", Journal of Analytical Atomic Spectroscopy, Vol. 5 (1990)

  87. Proulx P. , Mostaghimi J.T., Boulos M.I., "Heating of Powders in an RF Inductively Coupled Plasma under dense Loading Conditions", Plasma Chemistry and Plasma Processing, Vol. 7, No. 1, 29-53 (1987)

  88. Mostaghimi J.T., Proulx P. , Boulos M.I., "A Two-Temperature Model of the Inductively Coupled Plasma", Journal of Applied Physics, Vol. 61, No. 5, 1753-1760, (1987)

  89. Proulx P. , Mostaghimi J.T., Boulos M.I., "Plasma-Particle Interaction Effects in Induction Plasma Modelling under dense Loading Conditions", International Journal of Heat and Mass Transfer, 28 , 1327-1336, (1985)

  90. Mostaghimi J.T., Proulx P. , Boulos M.I., "Computer Modelling of the Emission Pattern for an ICP Spectrochemical Torch", Spectrochimica Acta, 40B , nos 1/2, 153-166, (1985)

  91. Mostaghimi J., Proulx P. , Boulos M.I., "An Analysis of the Computer Modelling of the Flow and Temperature Fields in an Inductively Coupled Plasma", Numerical Heat Transfer, 8 , 187-201, (1985)

  92. Mostaghimi J.T., Proulx P. , Boulos M.I., "Parametric Study of the Flow and Temperature Fields in an Inductively Coupled Plasma Torch", Plasma Chemistry and Plasma Processing, 4 , 129-139, (1984)


    93.

Conferences internationales avec compte-rendu, conferences invitees, conferences plenieres

  1. Proulx, P. , Lavoie F.,B. "Transport Phenomena teaching : a modern approach", 3rd International Conference on Digital Technology in Education, Tsuru, Japan, octobre (2019)

  2. Proulx, P. "Plasma-Particle Heat Transfer and Interactions in Thermal Plasma Production of Nanoparticles", Nano S&T-2019, Suzhou, China, octobre (2019)

  3. Lavoie F.B., Proulx, P., Gosselin R. "Using Data Acquired from Learning Management Systems to Predict Examination Results", Proceedings of the Canadian Engineering Education Association (CEEA) Conference, Ottawa, Canada may (2019)

  4. Lavoie F.B., Proulx, P, "Taking Advantage of the Big Data in Learning Management Systems", Proceedings of the Canadian Engineering Education Association (CEEA) Conference, Ottawa, Canada may (2019)

  5. Proulx, P., "Using mathematical models for the design of nanoparticle production in thermal plasma reactors", 4th International Conference on Smart Engineering Material, Auckland, New Zealand, 8-10 march (2019)

  6. Proulx, P., Lavoie F.B., "Improvements in Transport Phenomena Teaching ", Proceedings of the Canadian Engineering Education Association (CEEA) Conference, Vancouver, Canada 3-6 may (2018)

  7. Lavoie F.B., Proulx, P, "A Python Computer Science Course Taught with a New Web Platform", Proceedings of the Canadian Engineering Education Association (CEEA) Conference, Vancouver, Canada 3-6 may (2018)

  8. Proulx, P., Van Cappellen M., Lopes S., "Mathematical Modelling of Nanoparticle Production in Thermal Inductively Plasmas", 2nd International Conference on Materials Engineering and Functional Materials- ICMFM-2018, Da Nang, Vietnam, 5-7 may (2018)

  9. Askari E., St-Pierre Lemieux G., Litrico, G., Vieira, C.B., Proulx, P. "Simulation of Bubbly Flow and ass Transfer in a Turbulent Gas-Liquid Stirred Tank with CFD-PBM solver in OpenFOAM: EQMOM application" , 12th International Symposium on Numerical Analysis and Fluid Flow- ICNAAM (2017).

  10. Litrico, G., Vieira, C.B.,Askari E. Proulx, P. "Strongly coupled model for the prediction of the performances of an electrochemical reactor " , GLS-13, Brussels (2017).

  11. Caron-Laramee A., Proulx, P., Brouillette M., 'Elastic properties and fracture behavior of Perma-Gel compared to ballistic gelatin', 29th International Symposium on Ballistics , Edinburgh, (2016)

  12. Caron-Laramee A., Proulx, P., Brouillette M., 'Analytical model of particles injected into the skin by needle-free injection ', 6th International Conference on Mechanics of Biomaterials and Tissues , Hawai, (2015)

  13. Litrico G., Proulx, P., ' Optmization of the performances of a parallel plates electrochemical reactor', Journees d'electrochimie, Roma (2015)

  14. Lopes, S., Proulx, P., Gouriet, J.-B., Rambaud, P., 'Application of an Integrated CFD Model to Aluminum Nanoparticle Production', IHTC15, Kyoto (2014)

  15. Keynote Lecture: Proulx P., and Silvania Lopes, 'Development and Application of a Model for Metallic Nanopowders Production in a Thermal Plasma Reactor', New Trends in Transport Phenomena (NTTP14), Ottawa, may (2014).

  16. Litrico G., Leon-Perez L., Proulx P., Gouriet, J.-B., Rambaud P. , "Controlled oxidation of aluminum nanoparticles: modeling and validation", 5TH European Conference for Aeronautics and Space Sciences-EUCASS, Munich, Germany, july 1-4, (2013)

  17. Lopes S. Proulx P., Gouriet, J.-B., Rambaud P. , "Application of an integrated CFD model to the metallic nanoparticle production in anInductively coupled plasma reactor", 5TH European Conference for Aeronautics and Space Sciences-EUCASS, Munich, Germany, july 1-4, (2013)

  18. Lopes S. Proulx P., , Rambaud P. , "A Model for the Production of Nanoparticles in an Inductively Coupled Plasma Reactor: Application to the design of and Industrial Unit", Progress in Electromagnetic Research Symposium (PIERS), Taipeh, Taiwan,
    (2013)

  19. Lopes S. Proulx P.,, Gouriet, J.-B., Rambaud P. , "Model for Metallic Nanoparticles Production : a Tool for Design Study", TMS Annual Meeting, San Antonio, Texas, USA (2013)

  20. Ariana M., Desilets M.. Proulx P., ,"Numerical Analysis of Ionic Mass Transfer in the Electrolytic Bath of an Aluminum Reduction Cell", TMS Annual Meeting, San Antonio, Texas, USA (2013)

  21. Cupillard S., Page M., Bannari R., Giroux A.­M., Proulx P., and Deschênes C., "Cavitation modelling based on Eulerian­Eulerian multiphase flow for a propeller turbine with OpenFOAM", 26th IAHR Symposium on Hydraulic Machinery and Systems, Beijing, China, (2012)

  22. Bannari R, Proulx P, Cupillard S., Page M., and Giroux A.­M., "Cavitation modelling based on Eulerian­Eulerian multiphase flow" , Sixth OpenFOAM Workshop, Penn State University, USA (2012)

  23. R. Bannari, S. Cupillard, A­M. Giroux, M. Page and P. Proulx, "Cavitation Models : Performance and Limitations", Fifth OpenFOAM Workshop, Gothenburg, Germany (2010)

  24. INVITED CONFERENCE: Proulx P., "Mathematical modeling of inductively coupled plasma reactors for the production of nanoparticles: perspective, recent developments and use in the design of optimal reactors, The 18th Nisshin Engineering Particle Technology International Seminar NEPTIS 18, Hakone, Japan, December (2009)

  25. B. Selma, R. Bannari and P. Proulx, ' Comparison between Direct Quadrature Method of Moments and The Method of Classes for Bubbly Flow ' ,Fourth OpenFoam Workshop, Montreal, june 1-4 (2009) ,

  26. R. Bannari, B. Selma, A. Bannari and P. Proulx, 'Design and CFD analysis of mass transfer and distributions of shear stresses in Airlift reactor' , Fourth OpenFoam Workshop, Montreal, june 1-4 (2009)

  27. R. Bannari, B. Selma, A. Bannari and P. Proulx, 'A Coupled CFD-Kinetic Models for Cellulase Production in Airlift Reactor ' , Fourth OpenFoam Workshop, Montreal, june 1-4 (2009)

  28. CONFeRENCE PLENIERE: Proulx P., El Morsli Mbark, Mathematical modelling of advanced induction plasmas reactors for nanopowder production, CFD2007, Sendai, Japan, September (2007)

  29. CONFERENCE INVITEE: Proulx P., Industrial Applications of Mathematical Modeling of Thermal Plasmas, Conference on Coomputational Physics, CCP2007, Brussels, Belgium, September (2007)

  30. CONFERENCE INVITeE: Proulx P., Elmorsli M., Mathematical model of a supersonic induction plasma reactor for nanoparticle production, Sharm el Sheik round table on thermal plasma, Egypt (2007)

  31. El Morsli M., and P. Proulx, 'Carbon black processing by pyrolysis of methane in a supersonic ICP ' , 18th International Symposium on Plasma Chemistry, ISPC-18, Kyoto (2007)

  32. B. M. Goortani, P. Proulx, F. Gitzhofer, 'Thermal plasma synthesis of different SiO nanostructures by the injection of micrometric particles: moving from nanoparticles to nanorods' , 18th International Symposium on Plasma Chemistry, ISPC-18, Kyoto (2007)

  33. A. Bannari, F. Kerdouss, I. Bolduc, P. Proulx and C. Dupuis, 'Validation of CFD modelling of the kinetic alkali removal in a molten aluminum reactor using a population balance', 3rd International Conference on Population Balance Modelling-PBM2007, Quebec, (2007)

  34. B. Selma and P. Proulx, 'Application of PBE on the molten aluminium purification processes ' , 3rd International Conference on Population Balance Modelling-PBM2007, Quebec, (2007)

  35. M. El Morsli, N.Y. Mendoza Gonzalez and P. Proulx, 'CFD modelling of Nanoparticle Synthesis in Supersonic and Subsonic RF plasma reactor', 3rd International Conference on Population Balance Modelling-PBM2007, Quebec, (2007)

  36. R. Bannari, B. Selma and P. Proulx, ' Comparison in two Phase Mass Transfer between Class Method and Quadrature method of Moment in bubble column' , 3rd International Conference on Population Balance Modelling-PBM2007, Quebec, (2007)

  37. Bannari A., Proulx P., Mathematical modeling of electrocatalytic hydrogenation of phenol on a Pd/Al2O3 catalyst: effect of the configuration on efficiency, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  38. Bolduc I., Bannari A., Proulx P., Dupuis C., Validation of CFD modeling of alkali removal in a molten aluminum treatment reactor, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  39. Selma B., Proulx P. , Population balance modelling using the quadrature method of moments , 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  40. El Morsli M., Proulx P., A model for the production of the carbon black by pyrolysis of methane in a supersonic ICP, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  41. Mendoza-Gonzalez N.Y., Proulx P., Modelisation de la synthese de nanopoudres dans un reacteur à plasma inductif , 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  42. Mostajeran Goortani B., Mendoza N., Proulx P., Change of nanostructure and size along the reactor wall in the thermal plasma synthesis of nanoparticles, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  43. Bannari R., Proulx P., Two phase mass transfer coefficients prediction using the class method of population balance, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  44. El Morsli M., Bannari R., Proulx P., Induction plasma torch modelling: a comparison between a commercial and an open source package, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  45. El Morsli M., Proulx P., Two temperature chemically non-equilbrium modelling of air/N2 supersonic ICP, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  46. Bannari R., El Morsli M., Proulx P., Two temperature chemically non-equilbrium modelling of Ar/H2 supersonic ICP: a comparison between a commercial and an open source package, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  47. Bannari A., Proulx P., Electrocatalytic hydrogenation of phenol on a Pd/Al2O3 catalyst: mathematical modelling, 56e Congres canadien de Genie Chimique, Sherbrooke, (2006)

  48. Goortani B., Proulx P., Synthesis of SiO2 Nanoparticles in RF Plasma Reactor: Effect of Quench Gas Position, Wall Insulation, and Reactor Diameter , International Conference of nanotechnology, San Francisco , November (2005)

  49. El Morsli M. and Proulx P. "A Supersonic RF Plasma Torch Model for Nanoparticles Production", 17th International Symposium on Plasma Chemistry (ISPC-17), Toronto (Canada), (2005)

  50. Goortani B.M., Mendoza-Gonzalez N.-Y., and Proulx P. "An Experimental and Numerical Study of SiO2 Nanoparticles Synthesis in an RF Plasma Reactor", 17th International Symposium on Plasma Chemistry (ISPC-17), Toronto (Canada), (2005)

  51. Xue S., Proulx P., Murphy T., and Boulos M.I. "Non-Equilibrium Model for Multi-Component Ar-H2 Plasma under subsonic and supersonic flow conditions", 17th International Symposium on Plasma Chemistry (ISPC-17), Toronto (Canada), (2005)

  52. Xue S., Proulx P., Murphy T., and Boulos M.I. "A Thermal and Chemical non-Equilibrium Model for Multi-Component Ar-H2 Plasma", ITSC 05,Basel, Switzerland, (2005)

  53. Proulx P., Kerdouss F., Bilodeau J.-F., and Vaudreuil S. " Mathematical Modeling of Aluminum Refining by Rotary Injection", 133rd TMS Annual Meeting & Exhibition, Charlotte, North Carolina (USA), (2004)

  54. CONFERENCE PLENIERE: Proulx, P., « Induction Plasma Modelling: application to nanopowders production », 4th Inter.l Conf. on Electromagnetic Proc. of Mat. (EMP 2003), Lyon,(2003)

  55. Pelletier D., Delannoy Y., and Proulx P. "Modeling of chemical kinetics in inductively coupled plasma torches", 4th Inter.l Conf. on Electromagnetic Proc. of Mat. (EMP 2003), Lyon (France), (2003)

  56. Proulx P., Rivat P., and Trassy C. "Choice of reacting and plasma gas in RF plasma processes", 4th Inter. Conf. on Electromagnetic Proc. of Mat. (EMP 2003), Lyon (France), (2003)

  57. Xue S., Proulx P., and Boulos M.I. "Local Thermodynamic Equilibrium Condition for Inductive Plasma", 16th Inter. Symp. on Plasma Chem. (ISPC-16), Taormina (Italy), (2003)

  58. Xue S., Proulx P., Delannoy Y., and Boulos M.I. "Impedance model for the inductivity coupled rf plasma torch", 4th Inter. Conf. on Electromagnetic Proc. of Mat. (EMP 2003), Lyon (France), (2003)

  59. Xue S., Ernst R., Trassy C., and Proulx P. "High frequency inverse electromagnetic stirring in the plasma torches", 4th Inter. Conf. on Electromagnetic Proc. of Mat. (EMP 2003), Lyon (France),(2003)

  60. Xue S., Proulx P., and Boulos M.I. "Turbulence modelling of inductively coupled plasma flows", Inter. Thermal Spray Conf. (ITSC 2003), Orlando (Florida), (2003)

  61. Bartosiewicz,Y., Mercadier,Y., and Proulx,P. " A Self-Consistent Non-Equilibrium Model For Compressible Plasma Flows". ISTP-13, Victoria, Canada, july (2002)

  62. Bartosiewicz,Y., Mercadier,Y., and Proulx,P. , . "Numerical Investigations on the Dynamics and Heat Transfer in a Turbulent Underexpanded Jet", CFD202, Windsor, Canada, july (2002)

  63. Blais A., Proulx P., and Boulos M.I. "Modelling of a d.c. Transferred Arc in the Presence of an External Magnetic Field", 15th Inter. Symp. on Plasma Chemistry (ISPC 15), Orleans (France), III, pp. 1009-1014 (2001)

  64. Trassy C., Pateyron B., and Proulx P. "Effect of Electric Fields on the Non-Equilibrium in an ICP", 15th Inter. Symp. on Plasma Chemistry (ISPC 15), Orleans (France), (2001)

  65. Xue S., Proulx P., and Boulos M.I. "Extended field Model for the Induction Plasma Discharge", 15th Inter. Symp. on Plasma Chemistry (ISPC 15), Oleans (France), pp. 1227-1232 (2001)

  66. Blais,A., Proulx,P., and Boulos,M.I. "Modelisation tridimensionnelle d'un arc transfere influence par un champ magnetique externe.", 69e congres de l'Acfas, Sherbrooke, Canada, (2001)

  67. Xue S., Proulx P., and Boulos M.I. "Three-dimensional coil effects in induction plasma flow modeling", 15th Inter. Symp. on Plasma Chemistry (ISPC 15), Orleans (France), pp. 1221-1226 (2001)

  68. Bartosiewicz Y., Mercadier Y., and Proulx P. "Modeling of Turbulent Supersonic Underexplanded Thermal Jets", Flucome 2000, Sherbrooke (Canada), (2000)

  69. Blais A., Merkhouf A., Proulx P., and Boulos M.I. "Modelling of a transferred arc in presence of an external magnetic field", 27th IEEE Inter. Conf. on Plasma Science, New Orleans (Louisiana, USA), (2000)

  70. CONFERENCE INVITeE: Merkhouf A., Proulx P., and Boulos M.I. "Mathematical modeling of the induction plasma torch and its associated MHD fields using the FLUENT code", 27th IEEE Inter. Conf. on Plasma Science, New Orleans (Louisiana, USA), (2000)

  71. Merkhouf A., Proulx P., and Boulos M.I. "Mathematical modeling of the induction plasma torch and its associated MHD fields using the FLUENT code", Inter. Thermal Spray Conf. and Exposition (ITSC'2000), Montreal (Canada), (2000)

  72. Proulx P. and Trassy C. "Better Plasma Process Control Through CFD and Spectroscopic Modelling", Flucome 2000, Sherbrooke (Canada), (2000)

  73. Proulx P. and Trassy C. "Modeling of Plasma-Liquid Interaction in Silicon Refining", The 3rd Inter. Symp. on Electromagnetic Proc. of Mat. (EPM2000), Nagoya (Japan), (2000)

  74. CONFERENCE PLENIERE: Proulx, P., “Modelling of Plasma flows and plasma-surface interactions”, 50th Canadian Chemical Engineering Conference (CSChE), Montreal, Canada, (2000)

  75. Blais, A., Proulx,P., and Boulos,M.I. "Three-Dimensional Modeling of a Transferred Arc in the Presence of External Magnetic Field", 50th Canadian Chemical Engineering Conference (CSChE), Montreal, Canada, (2000)

  76. Kerdouss,F., Soucy,G., Proulx,P., Marcos,B., and Pomerleau,Y. "3D Model of a rotary kiln including combustion, heat transfer and reactions in the solid load", 8th Annual Conference of the Canadian society of CFD(CFD2K), Montreal, Canada, p. 977 (2000)

  77. Gosselin,L., Lacroix,M., and Proulx,P. "Numerical Study of Bank Formation in a Molten-Metal Bath", CERCA (Centre de recherche en calcul appliquE), Montreal, Canada, (2000)

  78. Bartosiewicz,Y., Proulx,P., and Mercadier,Y. "Modeling of Turbulent Supersonic Underexpanded Jets", 8th Annual Conference of the Canadian society of CFD(CFD2K), Montreal, Canada, (2000)

  79. Xue,S., Proulx,P., and Boulos,M.I. "Two Dimensional Electromagnetic Fields in Induction Plasma Modeling", 50th Canadian Chemical Engineering Conference (CSChE), Montreal, Canada, (2000)

  80. Trassy C. and Proulx P. "Modeling of the Plasma-Liquid Heat Transfer for the Silicon Purification by Plasma in Inductive Cold Crucible.", The 3rd Inter. Symp. on Electromagnetic Proc. of Mat. (EPM2000), Nagoya (Japan), (2000)

  81. Trassy C. and Proulx P. "Modelling of optical spectroscopic emission in inductively coupled plasma:application to process control", The 3rd Inter. Symp. on Electromagnetic Proc. of Mat. (EPM2000), Nagoya (Japan), (2000)

  82. Garnier M., Trassy C. and Proulx P. "Modelling of the plasma-liquid heat transfer for the silicon purification by plasma in inductive cold crucible", The 3rd Inter. Symp. on Electromagnetic Proc. of Mat. (EPM2000), Nagoya (Japan), (2000)

  83. CONFERENCE INVITeE: Proulx P. and Cyr S. "Modeling of Flow and Temperature Fields in Thermal Plasma Jet Reactors: Recent and Future Developments", ICHMT-99, Antalya (Turkey), (1999)

  84. Proulx P. and Trassy C. "Control of the Powder Dispersion in Induction Plasmas by Using a Double Flow Injector", Symp. on Fluid Flow Phenomena in Metals Proc., 1999 Annual TMS Meeting, San Diego , pp. 619-626 (1999)

  85. Ye R., Proulx P., and Boulos M.I. "Investigation of Turbulence Phenomena in the R.F. Plasma Torch", 14th Int.l Symp. on Plasma Chemistry - ISPC'14, Prague (Czech Republic), (1999)

  86. CONFERENCE INVITeE: Proulx P. and Cyr S. "Modeling of plasma reactors in the presence of particulates ",14th Int.l Symp. on Plasma Chemistry - ISPC'14, Prague (Czech Republic), (1999)

  87. Addona T., Munz R.J., and Proulx P. "Silica Decomposition in a Transferred Arc Reactor", IUPAC, 13th Inter. Symp. on Plasma Chemistry- ISPC13 , Beijing, China, 4, pp. 1590-1595 (August 18-22, 1997)

  88. Jodoin B. and Proulx P. "Parametric Study for the Design of Supersonic D.C. Plasma Jet", 13th International Symposium on Plasma Chemistry- IUPAC, 13th Inter. Symp. on Plasma Chemistry- ISPC13 , Beijing, China, 1, pp. 409-414 (August 18-22, 1997)

  89. Desilets M., Proulx P., and Bilodeau J.-F. "A Systematic Modeling Study of the Reactive Synthesis of Silicon Ultrafine Powders in a H.F. Plasma Reactor", IUPAC, 13th Inter. Symp. on Plasma Chemistry- ISPC13 , Beijing, China, 1, pp. 409-414 (August 18-22, 1997)

  90. Beauchire J.-M., Proulx P., and Gonzales J.-J. "Modelling of the Influence of Iron and Alumina Particles on a DC Plasma Torch", 4th European Conference on Thermal Plasma Processes - TPP-4, Athens (Greece), (1996)

  91. Bilodeau J.-F. and Proulx P. "Analysis of the Synthesis of Ultrafine AlN Powders in an Induction Plasma Reactor", 12th International Symposium on Plasma Chemistry - ISPC-12, Minneapolis (MN) (USA), 3, pp. 1201-1206 (1995)

  92. Desilets M. and Proulx P. "Multicomponent Mass Transfer in a Plasma Reactor: Comparison of Three Different Diffusion Flux Formulations", 12th International Symposium on Plasma Chemistry - ISPC-12, Minneapolis (MN) (USA), 3, pp. 1693-1698 (1995)

  93. Jodoin B., Proulx P., and Mercadier Y. "Time-Iterative Solutions of Inviscid Supersonic D.C. Plasma Jet", 12th International Symposium on Plasma Chemistry - ISPC-12, Minneapolis (MN) (USA), 3, pp. 1651-1656 (1995)

  94. CONFERENCE INVITeE: Bilodeau J.-F. and Proulx P. "Modelling of Ultrafine Particle Synthesis in a High Temperature Reactor", International Symposium on Heat and Mass Transfer Under Plasma Conditions , Izmir (Turkey), pp. 529-536 (1994)

  95. Proulx P., Essoltani A., Boulos M.I., "Effect of Radiative Cooling on the Heat Transfer to a Metallic Particle in a Thermal Plasma", 44th Canadian Conference of Chemical Engineering, Calgary, october(1994)

  96. Proulx P., Mostaghimi J. Boulos M.I., "A User Friendly Personal Computer Code for Calculating the Fields in an RF-ICP", Winter Conference on Plasma Spectrochemistry, San Diego, (1994)

  97. Gaillat A. , Barnes R., Proulx P., Boulos M.I., "Computer Simulation of Enclosed Inductively Coupled Neon Plasma Discharges", Winter Conference on Plasma Spectrochemistry, San Diego, (1994)

  98. Gaillat A. , Barnes R., Proulx P., Boulos M.I., "Analysis of the Simultaneous Effect of Generator Power and Frequency on the Temperature Fields in an Enclosed ICP", Winter Conference on Plasma Spectrochemistry, San Diego, (1994)

  99. Gaillat A. , Barnes R., Proulx P., Boulos M.I., "Study of Oxygen and Hydrogen Enclosed ICP by Computer Simulation", Winter Conference on Plasma Spectrochemistry, San Diego, (1994)

  100. Jurewicz J. and Proulx P. "Transfer Study in a DC Arc Furnace Bath Electrode", International Symposium on Heat and Mass Transfer Under Plasma Conditions, Izmir (Turkey), pp. 299-306 (1994)

  101. Cao M., Proulx P., Mostaghimi J., and Boulos M.I. "A Study of the Modelling of High Powder Transferred Arcs", 11th International Symposium on Plasma Chemistry - ISPC-11, Loughborough (United Kingdom), 1, pp. 216-221 (1993)

  102. Champoux Y. and Proulx P. "Entry Effects in the Measurement of Tortuosity for Porous Absorbant Materials", International Noise and Vibration Control Conference - NOISE'93, St-Petersburg (Russia), (1993)

  103. Essoltani A., Proulx P., and Boulos M.I. "Radiation of the Vapor Cloud Around a Metallic Particle Immersed in a Thermal Plasma", 11th International Symposium on Plasma Chemistry, Loughborough (United Kingdom), 1, pp. 481-486 (1993)

  104. Gonzales J.-J., Gleizes A., Proulx P., and Boulos M.I. " The Influence of Metallic Vapour on the Temperature Field in the Free Burning Arc", 11th International Symposium on Plasma Chemistry, Loughborough (United Kingdom), 1, pp. 278-283 (1993)

  105. Moura F., Munz R.J., Bilodeau J.-F., and Proulx P. "A Study of the Nucleation and Growth of Ultrafine AlN Powders in a Plasma Reactor", 11th International Symposium on Plasma Chemistry - ISPC-11, Loughborough (United Kingdom), (1993)

  106. Vardelle A., Vardelle M., Fauchais P., Proulx P., and Boulos M.I. "Loading Effect by Oxide Powders in D.C. Plasma Jets", International Thermal Spraying Conference, Orlando (FL) (USA), pp. 543-547 (1992)

  107. Gaillat A. , Proulx P., Barnes R., "Mathematical Modelling by Computer Simulation of Inductively Coupled Plasma Discharges", Research Symposium, University of Massachussets at Ahmerst, (1992)

  108. Essoltani A., Proulx P. , Boulos M.I., Gleizes A., "Radiative Effects on Plasma-Particle Heat Transfer in the Presence of Metallic Vapors", 10th International Symposium on Plasma Chemistry ISPC-10, Bochum (Germany) (1991)

  109. Essoltani A., Proulx P. , Boulos M.I., Gleizes A., "Etude des Phenomenes Radiatifs et leur Influence sur les Echanges Thermiques Plasma-Particules en Presence de Vapeur Metallique", 59th ACFAS Conference, Sherbrooke, (1991)

  110. Robitaille B., Proulx P. , Boulos M.I., "Modelisation des Interactions Plasma-Particules dans la Projection des Poudres par Plasma Inductif", 59th ACFAS Conference, Sherbrooke, (1991)

  111. Proulx P. , Bilodeau J.-F., "Etude des Phenomenes de Nucleation et Croissance des Aerosols dans les reacteurs Plasma", 59th ACFAS Conference, Sherbrooke, (1991)

  112. Proulx P. , Mostaghimi J., Boulos M.I., "Radiative Effects in ICP Modelling", Winter Conference on Plasma Spectrochemistry St. Petersburg, Florida (1990)

  113. CONFERENCE INVITeE: Essoltani A., Proulx P. , Boulos M.I., "Aerosol Vaporization in ICP Spectrochemical Analysis" FACSS XVII Conference, Cleveland (USA), (1990)

  114. Essoltani A., Proulx P. , Boulos M.I., Gleizes A., "Emission and Self-Absorption of an Argon-Iron Plasma at Atmospheric Pressure", Winter Conference on Plasma Spectrochemistry St. Petersburg, Florida (1990)

  115. Proulx P., "Modelisation de la Croissance de Poudres Ultrafines", 58th ACFAS Conference , Quebec, may (1990)

  116. Ishigaki H., Boulos M.I., Proulx P. "Modelling and Measurements in R.F. Plasma Deposition" Gordon Conference on Plasma Chemistry, Tilton (USA) (1990)

  117. Essoltani A., Proulx P. , Boulos M.I., "Influence of Radiation in Plasma Heat Transfer to a Single Particle" Gordon Conference on Plasma Chemistry, Tilton (USA) (1990)

  118. CONFERENCE INVITeE: Proulx P. , Boulos M.I. "Loading and Radiation Effects in D.C. Plasma Jet Modelling" Gordon Conference on Plasma Chemistry, Tilton (USA) (1990)

  119. Proulx P. , Bilodeau J.-F., "Ultrafine Powders Production in an R.F. Plasma: A Proposed Model", 9th International Symposium on Plasma Chemistry(ISPC-9), IUPAC, Pugnochiuso (Italie), pp. 888-893 (1989)

  120. Proulx P. , Mostaghimi J.T., Boulos M.I.,"Radiative Energy Transfer in Induction Plasma Modeling", 9th International Symposium on Plasma Chemistry(ISPC-9), IUPAC, Pugnochiuso (Italie), pp. 96-101 (1989)

  121. Proulx P. , Bilodeau J.-F., "A Numerical Simulation of the Production of Ultrafine Particles in a Thermal Plasma Reactor", 16th IEEE International Conference on Plasma Science, Buffalo, paper 4D2, May (1989)

  122. Proulx P. , Mostaghimi J.T., Boulos M.I.,"Radiative Effects in Induction Plasma Modeling", 16th IEEE International Conference on Plasma Science, Buffalo, paper 2C2, May (1989)

  123. Proulx P. , Mostaghimi J.T., Boulos M.I., "Modeling of a Turbulent Two-Phase Turbulent Plasma Jet", 8th International Symposium on Plasma Chemistry(ISPC-8), IUPAC, Tokyo (Japan), pp.13-18 (1987)

  124. Proulx P. , Mostaghimi J.T., Boulos M.I., "Numerical Simulation of a Two-Phase Turbulent Plasma Jet Reactor", 5th International Conference on Numerical Methods for Thermal Problems, Montreal,(Canada), Vol. 5 , No. 2, pp.1676-1687, (1987)

  125. Proulx P. , Boulos M., "Modelisation d'un jet de plasma turbulent avec injection de particules",54th ACFAS Conference, Montreal, may (1986)

  126. Mostaghimi J.T., Proulx P. , Boulos M.I., "A two temperature model of the inductively coupled plasma", 54th ACFAS Conference, Montreal, may (1986)

  127. Jurewicz J., Proulx P. , Boulos M.I., "The plasma spouted bed reactor", 7th International Symposium on Plasma Chemistry (ISPC-7), Eidhoven,(Holland), Vol. 1 , 243-248, (1985)

  128. Mostaghimi J.T., Proulx P. , Boulos M.I., "A two temperature model of the emission pattern for an ICP spectrochemical torch", 7th International Symposium on Plasma Chemistry (ISPC-7), Eidhoven,(Hollande), Vol. 3 , 865-872, (1985)

  129. Mostaghimi J.T., Proulx P. , Boulos M.I., "Computer modelling of the emission pattern for an ICP spectrochemical torch", Winter Conference on Plasma Spectrochemistry, San Diego, California, 2-6 january (1984)

  130. Proulx P. , Mostaghimi J.T., Boulos M.I., "Etude des Profils d'emission d'un plasma ICP sous des conditions d'analyse spectroscopique elementaire", 52nd ACFAS Conference, Quebec, may (1984)

  131. Proulx P. , Jurewicz J., Boulos M.I., "The plasma spouted bed reactor", 34th Canadian Conference of Chemical Engineering, Quebec, 30 sept.-3 oct. (1984)

  132. Proulx P. , Mostaghimi J., Boulos M.I., "Plasma-particle interaction effects in induction plasma modelling under dense loading conditions", 6th International Symposium on Plasma Chemistry (ISPC-6), Montreal,(Canada), Vol. 1 , 59-68, (1983)

Theses et memoires supervises completees

2019 - Roshanak Rabiee (Ph.D.) Universite de Sherbrooke

2018 - Ehsan Askari (Ph.D.) Sherbrooke

2018 - Ghofrane Sekrani (Ph.D.) Sherbrooke

2017 - Giuliana Litrico (Ph.D.)

2017 - Maxim Van Capellen (Research Master) Insitut von Karman de Dynamique des Fluides, Belgique

2016 - Silvânia Lopes(Ph.D.) Universite libre de Bruxelles et Institut von Karman de Dynamique des Fluides

2016 - Amelie Caron-Laramee (Ph.D)

2014 - Mohsen Ariana (Ph.D.)

2013 - Giuliana Litrico (Research Master) Insitut von Karman de Dynamique des Fluides, Belgique

2013 - Laura Leon Perez(M.Sc.A) Insitut von Karman de Dynamique des Fluides, Belgique

2013 - Daniel Rodriguez Calvete (Research Master) Insitut von Karman de Dynamique des Fluides, Belgique

2009 - Brahim Selma (Ph.D.)

2009 - Rachid Bannari (Ph.D.)

2008 - Mbark ElMorsli (Ph.D.)

2008 - Norma Mendoza (Ph.D.)

2007 - Abdelfettah Bannari (Ph.D.)

2006 - Behnam Mostageran Goortani (Ph.D.)

2006 - David Pelletier (Ph.D.) INPG-Sherbrooke

2005 - Isabelle Bolduc (M.Sc.A.)

2003 - Yann Bartosiewicz (Ph.D.)

2002 - Siwen Xue (Ph.D.)

2002 - Rubin Ye (Ph.D.)

2002 - Louis Gosselin (M.Sc.A.)

2002 - Norma-Yadira Gonzalez (M.Sc.A.)

2001 - Fouzi Kerdouss (Ph.D.)

2001 - Karel Burm ((Ph.D.) Technische Universiteit Eindhoven, the Netherlands

2001 - Alexandre Blais (M.Sc.A.)

2001 - Luke Munholand (M.Sc.A.)

2000 - Julie Bellerive (M.Sc.A.)

1998 - Tony Addona (Ph.D.) , McGill

1998 - Bertrand Jodoin (Ph.D.)

1998 - Emmanuel Bergeron (M.Sc.A.)

1998 - Alain Poulin (M.Sc.A.)

1998 - Amir Bouriayee (M.Sc.A.)

1997 - Martin Desilets (Ph.D.)

1995 - Daniel Tapin (M.Sc.A.)

1994 - Jean-François Bilodeau (Ph.D.)

1994 - Ming Cao(Ph.D.)

1991 - Abdelaziz Essoltani (Ph.D.)

1991 - Benoit Robitaille (M.Sc.A.)

Theses en cours

Maxim Van Capellen (Ph.D.) Insitut von Karman de Dynamique des Fluides, Belgique

Gabriel St-Pierre-Lemieux (Ph.D.) Universite de Sherbrooke


Brevets

INSTALLATION FOR INDUCTION TREATMENT OF A LOW-CONDUCTIVITY FLUID, ERNST, Roland, TRASSY, Christian, PROULX, Pierre, XUE, Siwen (2005)